EasyEDA Standard and EasyEDA Pro share several shortcuts, but some actions behave differently between the editors. Shortcuts can also be changed in settings, so check your active keymap if a key does nothing.
Update: EasyEDA Pro supports different shortcut styles. With Standard hotkeys selected in Pro, press W in the PCB editor to start drawing a track; in Pro hotkey style, the documented shortcut is Alt+W. The Standard editor also uses W for PCB track routing.
Shortcut matrix
| Action | EasyEDA Standard | EasyEDA Pro |
|---|---|---|
| Save | Ctrl+S |
Ctrl+S saves all; Ctrl+Shift+S saves |
| Undo / redo | Ctrl+Z / Ctrl+Y |
Ctrl+Z / Ctrl+Y |
| Rotate selected object | Space (also R) |
Space |
| Draw schematic wire | W |
Alt+W in Pro hotkey style; W in Standard style |
| Place schematic net label/name | N; label is a separate object |
N; assigns a name to the wire, not a separate Standard-style label |
| Find/place component | Shift+F searches the library |
Shift+F opens Place Device |
| Route PCB track | W |
Alt+W in Pro hotkey style; W in Standard style |
| Insert via while routing | V places a via; switching to bottom with B during routing inserts a via |
V is documented during active routing. If it does nothing, check Settings → Shortcuts; Pro also documents Alt+T/Alt+B to switch routing layers with automatic via placement |
| Switch top / bottom layer | T / B |
T / B |
| Highlight net | H |
H; clear highlights with Shift+H |
| Rebuild copper pours | Shift+B |
Shift+B |
| Autoroute | Use the Route menu; no default shortcut listed | Route → Auto Routing → All Nets, Selected Nets, or Selected Component Nets |
| Clear all routing | Route → Unroute → All | Route → Unroute → All |
Important Pro net-name difference
In EasyEDA Pro, a net label is the wire’s name property. Select the wire and edit Name in Properties, or double-click the displayed net name. If Global Net Name is set, check that too. Renaming a connected wire can affect connected branches, so verify the resulting nets before updating or ordering a PCB.